ar2413.c

Go to the documentation of this file.

/*-
 * SPDX-License-Identifier: ISC
 *
 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
 * Copyright (c) 2002-2008 Atheros Communications, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 * $FreeBSD$
 */
#include "opt_ah.h"
 
#include "ah.h"
#include "ah_internal.h"
 
#include "ar5212/ar5212.h"
#include "ar5212/ar5212reg.h"
#include "ar5212/ar5212phy.h"
 
#include "ah_eeprom_v3.h"
 
#define AH_5212_2413
#include "ar5212/ar5212.ini"
 
#define N(a)    (sizeof(a)/sizeof(a[0]))
 
struct ar2413State {
        RF_HAL_FUNCS    base;           /* public state, must be first */
        uint16_t        pcdacTable[PWR_TABLE_SIZE_2413];
 
        uint32_t        Bank1Data[N(ar5212Bank1_2413)];
        uint32_t        Bank2Data[N(ar5212Bank2_2413)];
        uint32_t        Bank3Data[N(ar5212Bank3_2413)];
        uint32_t        Bank6Data[N(ar5212Bank6_2413)];
        uint32_t        Bank7Data[N(ar5212Bank7_2413)];
 
        /*
         * Private state for reduced stack usage.
         */
        /* filled out Vpd table for all pdGains (chanL) */
        uint16_t vpdTable_L[MAX_NUM_PDGAINS_PER_CHANNEL]
                            [MAX_PWR_RANGE_IN_HALF_DB];
        /* filled out Vpd table for all pdGains (chanR) */
        uint16_t vpdTable_R[MAX_NUM_PDGAINS_PER_CHANNEL]
                            [MAX_PWR_RANGE_IN_HALF_DB];
        /* filled out Vpd table for all pdGains (interpolated) */
        uint16_t vpdTable_I[MAX_NUM_PDGAINS_PER_CHANNEL]
                            [MAX_PWR_RANGE_IN_HALF_DB];
};
#define AR2413(ah)      ((struct ar2413State *) AH5212(ah)->ah_rfHal)
 
extern  void ar5212ModifyRfBuffer(uint32_t *rfBuf, uint32_t reg32,
                uint32_t numBits, uint32_t firstBit, uint32_t column);
 
static void
ar2413WriteRegs(struct ath_hal *ah, u_int modesIndex, u_int freqIndex,
        int writes)
{
        HAL_INI_WRITE_ARRAY(ah, ar5212Modes_2413, modesIndex, writes);
        HAL_INI_WRITE_ARRAY(ah, ar5212Common_2413, 1, writes);
        HAL_INI_WRITE_ARRAY(ah, ar5212BB_RfGain_2413, freqIndex, writes);
}
 
/*
 * Take the MHz channel value and set the Channel value
 *
 * ASSUMES: Writes enabled to analog bus
 */
static HAL_BOOL
ar2413SetChannel(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
        uint16_t freq = ath_hal_gethwchannel(ah, chan);
        uint32_t channelSel  = 0;
        uint32_t bModeSynth  = 0;
        uint32_t aModeRefSel = 0;
        uint32_t reg32       = 0;
 
        OS_MARK(ah, AH_MARK_SETCHANNEL, freq);
 
        if (freq < 4800) {
                uint32_t txctl;
 
                if (((freq - 2192) % 5) == 0) {
                        channelSel = ((freq - 672) * 2 - 3040)/10;
                        bModeSynth = 0;
                } else if (((freq - 2224) % 5) == 0) {
                        channelSel = ((freq - 704) * 2 - 3040) / 10;
                        bModeSynth = 1;
                } else {
                        HALDEBUG(ah, HAL_DEBUG_ANY,
                            "%s: invalid channel %u MHz\n",
                            __func__, freq);
                        return AH_FALSE;
                }
 
                channelSel = (channelSel << 2) & 0xff;
                channelSel = ath_hal_reverseBits(channelSel, 8);
 
                txctl = OS_REG_READ(ah, AR_PHY_CCK_TX_CTRL);
                if (freq == 2484) {
                        /* Enable channel spreading for channel 14 */
                        OS_REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
                                txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
                } else {
                        OS_REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
                                txctl &~ AR_PHY_CCK_TX_CTRL_JAPAN);
                }
        } else if (((freq % 5) == 2) && (freq <= 5435)) {
                freq = freq - 2; /* Align to even 5MHz raster */
                channelSel = ath_hal_reverseBits(
                        (uint32_t)(((freq - 4800)*10)/25 + 1), 8);
                aModeRefSel = ath_hal_reverseBits(0, 2);
        } else if ((freq % 20) == 0 && freq >= 5120) {
                channelSel = ath_hal_reverseBits(
                        ((freq - 4800) / 20 << 2), 8);
                aModeRefSel = ath_hal_reverseBits(3, 2);
        } else if ((freq % 10) == 0) {
                channelSel = ath_hal_reverseBits(
                        ((freq - 4800) / 10 << 1), 8);
                aModeRefSel = ath_hal_reverseBits(2, 2);
        } else if ((freq % 5) == 0) {
                channelSel = ath_hal_reverseBits(
                        (freq - 4800) / 5, 8);
                aModeRefSel = ath_hal_reverseBits(1, 2);
        } else {
                HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid channel %u MHz\n",
                    __func__, freq);
                return AH_FALSE;
        }
 
        reg32 = (channelSel << 4) | (aModeRefSel << 2) | (bModeSynth << 1) |
                        (1 << 12) | 0x1;
        OS_REG_WRITE(ah, AR_PHY(0x27), reg32 & 0xff);
 
        reg32 >>= 8;
        OS_REG_WRITE(ah, AR_PHY(0x36), reg32 & 0x7f);
 
        AH_PRIVATE(ah)->ah_curchan = chan;
 
        return AH_TRUE;
}
 
/*
 * Reads EEPROM header info from device structure and programs
 * all rf registers
 *
 * REQUIRES: Access to the analog rf device
 */
static HAL_BOOL
ar2413SetRfRegs(struct ath_hal *ah,
        const struct ieee80211_channel *chan,
        uint16_t modesIndex, uint16_t *rfXpdGain)
{
#define RF_BANK_SETUP(_priv, _ix, _col) do {                                \
        int i;                                                              \
        for (i = 0; i < N(ar5212Bank##_ix##_2413); i++)                     \
                (_priv)->Bank##_ix##Data[i] = ar5212Bank##_ix##_2413[i][_col];\
} while (0)
        struct ath_hal_5212 *ahp = AH5212(ah);
        const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom;
        uint16_t ob2GHz = 0, db2GHz = 0;
        struct ar2413State *priv = AR2413(ah);
        int regWrites = 0;
 
        HALDEBUG(ah, HAL_DEBUG_RFPARAM, "%s: chan %u/0x%x modesIndex %u\n",
            __func__, chan->ic_freq, chan->ic_flags, modesIndex);
 
        HALASSERT(priv);
 
        /* Setup rf parameters */
        if (IEEE80211_IS_CHAN_B(chan)) {
                ob2GHz = ee->ee_obFor24;
                db2GHz = ee->ee_dbFor24;
        } else {
                ob2GHz = ee->ee_obFor24g;
                db2GHz = ee->ee_dbFor24g;
        }
 
        /* Bank 1 Write */
        RF_BANK_SETUP(priv, 1, 1);
 
        /* Bank 2 Write */
        RF_BANK_SETUP(priv, 2, modesIndex);
 
        /* Bank 3 Write */
        RF_BANK_SETUP(priv, 3, modesIndex);
 
        /* Bank 6 Write */
        RF_BANK_SETUP(priv, 6, modesIndex);
 
        ar5212ModifyRfBuffer(priv->Bank6Data, ob2GHz,   3, 168, 0);
        ar5212ModifyRfBuffer(priv->Bank6Data, db2GHz,   3, 165, 0);
 
        /* Bank 7 Setup */
        RF_BANK_SETUP(priv, 7, modesIndex);
 
        /* Write Analog registers */
        HAL_INI_WRITE_BANK(ah, ar5212Bank1_2413, priv->Bank1Data, regWrites);
        HAL_INI_WRITE_BANK(ah, ar5212Bank2_2413, priv->Bank2Data, regWrites);
        HAL_INI_WRITE_BANK(ah, ar5212Bank3_2413, priv->Bank3Data, regWrites);
        HAL_INI_WRITE_BANK(ah, ar5212Bank6_2413, priv->Bank6Data, regWrites);
        HAL_INI_WRITE_BANK(ah, ar5212Bank7_2413, priv->Bank7Data, regWrites);
 
        /* Now that we have reprogrammed rfgain value, clear the flag. */
        ahp->ah_rfgainState = HAL_RFGAIN_INACTIVE;
 
        return AH_TRUE;
#undef  RF_BANK_SETUP
}
 
/*
 * Return a reference to the requested RF Bank.
 */
static uint32_t *
ar2413GetRfBank(struct ath_hal *ah, int bank)
{
        struct ar2413State *priv = AR2413(ah);
 
        HALASSERT(priv != AH_NULL);
        switch (bank) {
        case 1: return priv->Bank1Data;
        case 2: return priv->Bank2Data;
        case 3: return priv->Bank3Data;
        case 6: return priv->Bank6Data;
        case 7: return priv->Bank7Data;
        }
        HALDEBUG(ah, HAL_DEBUG_ANY, "%s: unknown RF Bank %d requested\n",
            __func__, bank);
        return AH_NULL;
}
 
/*
 * Return indices surrounding the value in sorted integer lists.
 *
 * NB: the input list is assumed to be sorted in ascending order
 */
static void
GetLowerUpperIndex(int16_t v, const uint16_t *lp, uint16_t listSize,
                          uint32_t *vlo, uint32_t *vhi)
{
        int16_t target = v;
        const uint16_t *ep = lp+listSize;
        const uint16_t *tp;
 
        /*
         * Check first and last elements for out-of-bounds conditions.
         */
        if (target < lp[0]) {
                *vlo = *vhi = 0;
                return;
        }
        if (target >= ep[-1]) {
                *vlo = *vhi = listSize - 1;
                return;
        }
 
        /* look for value being near or between 2 values in list */
        for (tp = lp; tp < ep; tp++) {
                /*
                 * If value is close to the current value of the list
                 * then target is not between values, it is one of the values
                 */
                if (*tp == target) {
                        *vlo = *vhi = tp - (const uint16_t *) lp;
                        return;
                }
                /*
                 * Look for value being between current value and next value
                 * if so return these 2 values
                 */
                if (target < tp[1]) {
                        *vlo = tp - (const uint16_t *) lp;
                        *vhi = *vlo + 1;
                        return;
                }
        }
}
 
/*
 * Fill the Vpdlist for indices Pmax-Pmin
 */
static HAL_BOOL
ar2413FillVpdTable(uint32_t pdGainIdx, int16_t Pmin, int16_t  Pmax,
                   const int16_t *pwrList, const uint16_t *VpdList,
                   uint16_t numIntercepts, uint16_t retVpdList[][64])
{
        uint16_t ii, jj, kk;
        int16_t currPwr = (int16_t)(2*Pmin);
        /* since Pmin is pwr*2 and pwrList is 4*pwr */
        uint32_t  idxL, idxR;
 
        ii = 0;
        jj = 0;
 
        if (numIntercepts < 2)
                return AH_FALSE;
 
        while (ii <= (uint16_t)(Pmax - Pmin)) {
                GetLowerUpperIndex(currPwr, (const uint16_t *) pwrList,
                                   numIntercepts, &(idxL), &(idxR));
                if (idxR < 1)
                        idxR = 1;                       /* extrapolate below */
                if (idxL == (uint32_t)(numIntercepts - 1))
                        idxL = numIntercepts - 2;       /* extrapolate above */
                if (pwrList[idxL] == pwrList[idxR])
                        kk = VpdList[idxL];
                else
                        kk = (uint16_t)
                                (((currPwr - pwrList[idxL])*VpdList[idxR]+ 
                                  (pwrList[idxR] - currPwr)*VpdList[idxL])/
                                 (pwrList[idxR] - pwrList[idxL]));
                retVpdList[pdGainIdx][ii] = kk;
                ii++;
                currPwr += 2;                           /* half dB steps */
        }
 
        return AH_TRUE;
}
 
/*
 * Returns interpolated or the scaled up interpolated value
 */
static int16_t
interpolate_signed(uint16_t target, uint16_t srcLeft, uint16_t srcRight,
        int16_t targetLeft, int16_t targetRight)
{
        int16_t rv;
 
        if (srcRight != srcLeft) {
                rv = ((target - srcLeft)*targetRight +
                      (srcRight - target)*targetLeft) / (srcRight - srcLeft);
        } else {
                rv = targetLeft;
        }
        return rv;
}
 
/*
 * Uses the data points read from EEPROM to reconstruct the pdadc power table
 * Called by ar2413SetPowerTable()
 */
static int 
ar2413getGainBoundariesAndPdadcsForPowers(struct ath_hal *ah, uint16_t channel,
                const RAW_DATA_STRUCT_2413 *pRawDataset,
                uint16_t pdGainOverlap_t2, 
                int16_t  *pMinCalPower, uint16_t pPdGainBoundaries[], 
                uint16_t pPdGainValues[], uint16_t pPDADCValues[]) 
{
        struct ar2413State *priv = AR2413(ah);
#define VpdTable_L      priv->vpdTable_L
#define VpdTable_R      priv->vpdTable_R
#define VpdTable_I      priv->vpdTable_I
        uint32_t ii, jj, kk;
        int32_t ss;/* potentially -ve index for taking care of pdGainOverlap */
        uint32_t idxL, idxR;
        uint32_t numPdGainsUsed = 0;
        /* 
         * If desired to support -ve power levels in future, just
         * change pwr_I_0 to signed 5-bits.
         */
        int16_t Pmin_t2[MAX_NUM_PDGAINS_PER_CHANNEL];
        /* to accommodate -ve power levels later on. */
        int16_t Pmax_t2[MAX_NUM_PDGAINS_PER_CHANNEL];
        /* to accommodate -ve power levels later on */
        uint16_t numVpd = 0;
        uint16_t Vpd_step;
        int16_t tmpVal ; 
        uint32_t sizeCurrVpdTable, maxIndex, tgtIndex;
 
        /* Get upper lower index */
        GetLowerUpperIndex(channel, pRawDataset->pChannels,
                                 pRawDataset->numChannels, &(idxL), &(idxR));
 
        for (ii = 0; ii < MAX_NUM_PDGAINS_PER_CHANNEL; ii++) {
                jj = MAX_NUM_PDGAINS_PER_CHANNEL - ii - 1;
                /* work backwards 'cause highest pdGain for lowest power */
                numVpd = pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].numVpd;
                if (numVpd > 0) {
                        pPdGainValues[numPdGainsUsed] = pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].pd_gain;
                        Pmin_t2[numPdGainsUsed] = pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].pwr_t4[0];
                        if (Pmin_t2[numPdGainsUsed] >pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[0]) {
                                Pmin_t2[numPdGainsUsed] = pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[0];
                        }
                        Pmin_t2[numPdGainsUsed] = (int16_t)
                                (Pmin_t2[numPdGainsUsed] / 2);
                        Pmax_t2[numPdGainsUsed] = pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].pwr_t4[numVpd-1];
                        if (Pmax_t2[numPdGainsUsed] > pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[numVpd-1])
                                Pmax_t2[numPdGainsUsed] = 
                                        pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[numVpd-1];
                        Pmax_t2[numPdGainsUsed] = (int16_t)(Pmax_t2[numPdGainsUsed] / 2);
                        ar2413FillVpdTable(
                                           numPdGainsUsed, Pmin_t2[numPdGainsUsed], Pmax_t2[numPdGainsUsed], 
                                           &(pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].pwr_t4[0]), 
                                           &(pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].Vpd[0]), numVpd, VpdTable_L
                                           );
                        ar2413FillVpdTable(
                                           numPdGainsUsed, Pmin_t2[numPdGainsUsed], Pmax_t2[numPdGainsUsed], 
                                           &(pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[0]),
                                           &(pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].Vpd[0]), numVpd, VpdTable_R
                                           );
                        for (kk = 0; kk < (uint16_t)(Pmax_t2[numPdGainsUsed] - Pmin_t2[numPdGainsUsed]); kk++) {
                                VpdTable_I[numPdGainsUsed][kk] = 
                                        interpolate_signed(
                                                           channel, pRawDataset->pChannels[idxL], pRawDataset->pChannels[idxR],
                                                           (int16_t)VpdTable_L[numPdGainsUsed][kk], (int16_t)VpdTable_R[numPdGainsUsed][kk]);
                        }
                        /* fill VpdTable_I for this pdGain */
                        numPdGainsUsed++;
                }
                /* if this pdGain is used */
        }
 
        *pMinCalPower = Pmin_t2[0];
        kk = 0; /* index for the final table */
        for (ii = 0; ii < numPdGainsUsed; ii++) {
                if (ii == (numPdGainsUsed - 1))
                        pPdGainBoundaries[ii] = Pmax_t2[ii] +
                                PD_GAIN_BOUNDARY_STRETCH_IN_HALF_DB;
                else 
                        pPdGainBoundaries[ii] = (uint16_t)
                                ((Pmax_t2[ii] + Pmin_t2[ii+1]) / 2 );
                if (pPdGainBoundaries[ii] > 63) {
                        HALDEBUG(ah, HAL_DEBUG_ANY,
                            "%s: clamp pPdGainBoundaries[%d] %d\n",
                            __func__, ii, pPdGainBoundaries[ii]);/*XXX*/
                        pPdGainBoundaries[ii] = 63;
                }
 
                /* Find starting index for this pdGain */
                if (ii == 0) 
                        ss = 0; /* for the first pdGain, start from index 0 */
                else 
                        ss = (pPdGainBoundaries[ii-1] - Pmin_t2[ii]) - 
                                pdGainOverlap_t2;
                Vpd_step = (uint16_t)(VpdTable_I[ii][1] - VpdTable_I[ii][0]);
                Vpd_step = (uint16_t)((Vpd_step < 1) ? 1 : Vpd_step);
                /*
                 *-ve ss indicates need to extrapolate data below for this pdGain
                 */
                while (ss < 0) {
                        tmpVal = (int16_t)(VpdTable_I[ii][0] + ss*Vpd_step);
                        pPDADCValues[kk++] = (uint16_t)((tmpVal < 0) ? 0 : tmpVal);
                        ss++;
                }
 
                sizeCurrVpdTable = Pmax_t2[ii] - Pmin_t2[ii];
                tgtIndex = pPdGainBoundaries[ii] + pdGainOverlap_t2 - Pmin_t2[ii];
                maxIndex = (tgtIndex < sizeCurrVpdTable) ? tgtIndex : sizeCurrVpdTable;
 
                while (ss < (int16_t)maxIndex)
                        pPDADCValues[kk++] = VpdTable_I[ii][ss++];
 
                Vpd_step = (uint16_t)(VpdTable_I[ii][sizeCurrVpdTable-1] -
                                       VpdTable_I[ii][sizeCurrVpdTable-2]);
                Vpd_step = (uint16_t)((Vpd_step < 1) ? 1 : Vpd_step);           
                /*
                 * for last gain, pdGainBoundary == Pmax_t2, so will 
                 * have to extrapolate
                 */
                if (tgtIndex > maxIndex) {      /* need to extrapolate above */
                        while(ss < (int16_t)tgtIndex) {
                                tmpVal = (uint16_t)
                                        (VpdTable_I[ii][sizeCurrVpdTable-1] + 
                                         (ss-maxIndex)*Vpd_step);
                                pPDADCValues[kk++] = (tmpVal > 127) ? 
                                        127 : tmpVal;
                                ss++;
                        }
                }                               /* extrapolated above */
        }                                       /* for all pdGainUsed */
 
        while (ii < MAX_NUM_PDGAINS_PER_CHANNEL) {
                pPdGainBoundaries[ii] = pPdGainBoundaries[ii-1];
                ii++;
        }
        while (kk < 128) {
                pPDADCValues[kk] = pPDADCValues[kk-1];
                kk++;
        }
 
        return numPdGainsUsed;
#undef VpdTable_L
#undef VpdTable_R
#undef VpdTable_I
}
 
static HAL_BOOL
ar2413SetPowerTable(struct ath_hal *ah,
        int16_t *minPower, int16_t *maxPower,
        const struct ieee80211_channel *chan, 
        uint16_t *rfXpdGain)
{
        uint16_t freq = ath_hal_gethwchannel(ah, chan);
        struct ath_hal_5212 *ahp = AH5212(ah);
        const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom;
        const RAW_DATA_STRUCT_2413 *pRawDataset = AH_NULL;
        uint16_t pdGainOverlap_t2;
        int16_t minCalPower2413_t2;
        uint16_t *pdadcValues = ahp->ah_pcdacTable;
        uint16_t gainBoundaries[4];
        uint32_t reg32, regoffset;
        int i, numPdGainsUsed;
#ifndef AH_USE_INIPDGAIN
        uint32_t tpcrg1;
#endif
 
        HALDEBUG(ah, HAL_DEBUG_RFPARAM, "%s: chan 0x%x flag 0x%x\n",
            __func__, freq, chan->ic_flags);
 
        if (IEEE80211_IS_CHAN_G(chan) || IEEE80211_IS_CHAN_108G(chan))
                pRawDataset = &ee->ee_rawDataset2413[headerInfo11G];
        else if (IEEE80211_IS_CHAN_B(chan))
                pRawDataset = &ee->ee_rawDataset2413[headerInfo11B];
        else {
                HALDEBUG(ah, HAL_DEBUG_ANY, "%s: illegal mode\n", __func__);
                return AH_FALSE;
        }
 
        pdGainOverlap_t2 = (uint16_t) SM(OS_REG_READ(ah, AR_PHY_TPCRG5),
                                          AR_PHY_TPCRG5_PD_GAIN_OVERLAP);
    
        numPdGainsUsed = ar2413getGainBoundariesAndPdadcsForPowers(ah,
                freq, pRawDataset, pdGainOverlap_t2,
                &minCalPower2413_t2,gainBoundaries, rfXpdGain, pdadcValues);
        HALASSERT(1 <= numPdGainsUsed && numPdGainsUsed <= 3);
 
#ifdef AH_USE_INIPDGAIN
        /*
         * Use pd_gains curve from eeprom; Atheros always uses
         * the default curve from the ini file but some vendors
         * (e.g. Zcomax) want to override this curve and not
         * honoring their settings results in tx power 5dBm low.
         */
        OS_REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN, 
                         (pRawDataset->pDataPerChannel[0].numPdGains - 1));
#else
        tpcrg1 = OS_REG_READ(ah, AR_PHY_TPCRG1);
        tpcrg1 = (tpcrg1 &~ AR_PHY_TPCRG1_NUM_PD_GAIN)
                  | SM(numPdGainsUsed-1, AR_PHY_TPCRG1_NUM_PD_GAIN);
        switch (numPdGainsUsed) {
        case 3:
                tpcrg1 &= ~AR_PHY_TPCRG1_PDGAIN_SETTING3;
                tpcrg1 |= SM(rfXpdGain[2], AR_PHY_TPCRG1_PDGAIN_SETTING3);
                /* fall thru... */
        case 2:
                tpcrg1 &= ~AR_PHY_TPCRG1_PDGAIN_SETTING2;
                tpcrg1 |= SM(rfXpdGain[1], AR_PHY_TPCRG1_PDGAIN_SETTING2);
                /* fall thru... */
        case 1:
                tpcrg1 &= ~AR_PHY_TPCRG1_PDGAIN_SETTING1;
                tpcrg1 |= SM(rfXpdGain[0], AR_PHY_TPCRG1_PDGAIN_SETTING1);
                break;
        }
#ifdef AH_DEBUG
        if (tpcrg1 != OS_REG_READ(ah, AR_PHY_TPCRG1))
                HALDEBUG(ah, HAL_DEBUG_RFPARAM, "%s: using non-default "
                    "pd_gains (default 0x%x, calculated 0x%x)\n",
                    __func__, OS_REG_READ(ah, AR_PHY_TPCRG1), tpcrg1);
#endif
        OS_REG_WRITE(ah, AR_PHY_TPCRG1, tpcrg1);
#endif
 
        /*
         * Note the pdadc table may not start at 0 dBm power, could be
         * negative or greater than 0.  Need to offset the power
         * values by the amount of minPower for griffin
         */
        if (minCalPower2413_t2 != 0)
                ahp->ah_txPowerIndexOffset = (int16_t)(0 - minCalPower2413_t2);
        else
                ahp->ah_txPowerIndexOffset = 0;
 
        /* Finally, write the power values into the baseband power table */
        regoffset = 0x9800 + (672 <<2); /* beginning of pdadc table in griffin */
        for (i = 0; i < 32; i++) {
                reg32 = ((pdadcValues[4*i + 0] & 0xFF) << 0)  | 
                        ((pdadcValues[4*i + 1] & 0xFF) << 8)  |
                        ((pdadcValues[4*i + 2] & 0xFF) << 16) |
                        ((pdadcValues[4*i + 3] & 0xFF) << 24) ;        
                OS_REG_WRITE(ah, regoffset, reg32);
                regoffset += 4;
        }
 
        OS_REG_WRITE(ah, AR_PHY_TPCRG5, 
                     SM(pdGainOverlap_t2, AR_PHY_TPCRG5_PD_GAIN_OVERLAP) | 
                     SM(gainBoundaries[0], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1) |
                     SM(gainBoundaries[1], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2) |
                     SM(gainBoundaries[2], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3) |
                     SM(gainBoundaries[3], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4));
 
        return AH_TRUE;
}
 
static int16_t
ar2413GetMinPower(struct ath_hal *ah, const RAW_DATA_PER_CHANNEL_2413 *data)
{
        uint32_t ii,jj;
        uint16_t Pmin=0,numVpd;
 
        for (ii = 0; ii < MAX_NUM_PDGAINS_PER_CHANNEL; ii++) {
                jj = MAX_NUM_PDGAINS_PER_CHANNEL - ii - 1;
                /* work backwards 'cause highest pdGain for lowest power */
                numVpd = data->pDataPerPDGain[jj].numVpd;
                if (numVpd > 0) {
                        Pmin = data->pDataPerPDGain[jj].pwr_t4[0];
                        return(Pmin);
                }
        }
        return(Pmin);
}
 
static int16_t
ar2413GetMaxPower(struct ath_hal *ah, const RAW_DATA_PER_CHANNEL_2413 *data)
{
        uint32_t ii;
        uint16_t Pmax=0,numVpd;
 
        for (ii=0; ii< MAX_NUM_PDGAINS_PER_CHANNEL; ii++) {
                /* work forwards cuase lowest pdGain for highest power */
                numVpd = data->pDataPerPDGain[ii].numVpd;
                if (numVpd > 0) {
                        Pmax = data->pDataPerPDGain[ii].pwr_t4[numVpd-1];
                        return(Pmax);
                }
        }
        return(Pmax);
}
 
static HAL_BOOL
ar2413GetChannelMaxMinPower(struct ath_hal *ah,
        const struct ieee80211_channel *chan,
        int16_t *maxPow, int16_t *minPow)
{
        uint16_t freq = chan->ic_freq;          /* NB: never mapped */
        const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom;
        const RAW_DATA_STRUCT_2413 *pRawDataset = AH_NULL;
        const RAW_DATA_PER_CHANNEL_2413 *data = AH_NULL;
        uint16_t numChannels;
        int totalD,totalF, totalMin,last, i;
 
        *maxPow = 0;
 
        if (IEEE80211_IS_CHAN_G(chan) || IEEE80211_IS_CHAN_108G(chan))
                pRawDataset = &ee->ee_rawDataset2413[headerInfo11G];
        else if (IEEE80211_IS_CHAN_B(chan))
                pRawDataset = &ee->ee_rawDataset2413[headerInfo11B];
        else
                return(AH_FALSE);
 
        numChannels = pRawDataset->numChannels;
        data = pRawDataset->pDataPerChannel;
 
        /* Make sure the channel is in the range of the TP values 
         *  (freq piers)
         */
        if (numChannels < 1)
                return(AH_FALSE);
 
        if ((freq < data[0].channelValue) ||
            (freq > data[numChannels-1].channelValue)) {
                if (freq < data[0].channelValue) {
                        *maxPow = ar2413GetMaxPower(ah, &data[0]);
                        *minPow = ar2413GetMinPower(ah, &data[0]);
                        return(AH_TRUE);
                } else {
                        *maxPow = ar2413GetMaxPower(ah, &data[numChannels - 1]);
                        *minPow = ar2413GetMinPower(ah, &data[numChannels - 1]);
                        return(AH_TRUE);
                }
        }
 
        /* Linearly interpolate the power value now */
        for (last=0,i=0; (i<numChannels) && (freq > data[i].channelValue);
             last = i++);
        totalD = data[i].channelValue - data[last].channelValue;
        if (totalD > 0) {
                totalF = ar2413GetMaxPower(ah, &data[i]) - ar2413GetMaxPower(ah, &data[last]);
                *maxPow = (int8_t) ((totalF*(freq-data[last].channelValue) + 
                                     ar2413GetMaxPower(ah, &data[last])*totalD)/totalD);
                totalMin = ar2413GetMinPower(ah, &data[i]) - ar2413GetMinPower(ah, &data[last]);
                *minPow = (int8_t) ((totalMin*(freq-data[last].channelValue) +
                                     ar2413GetMinPower(ah, &data[last])*totalD)/totalD);
                return(AH_TRUE);
        } else {
                if (freq == data[i].channelValue) {
                        *maxPow = ar2413GetMaxPower(ah, &data[i]);
                        *minPow = ar2413GetMinPower(ah, &data[i]);
                        return(AH_TRUE);
                } else
                        return(AH_FALSE);
        }
}
 
/*
 * Free memory for analog bank scratch buffers
 */
static void
ar2413RfDetach(struct ath_hal *ah)
{
        struct ath_hal_5212 *ahp = AH5212(ah);
 
        HALASSERT(ahp->ah_rfHal != AH_NULL);
        ath_hal_free(ahp->ah_rfHal);
        ahp->ah_rfHal = AH_NULL;
}
 
/*
 * Allocate memory for analog bank scratch buffers
 * Scratch Buffer will be reinitialized every reset so no need to zero now
 */
static HAL_BOOL
ar2413RfAttach(struct ath_hal *ah, HAL_STATUS *status)
{
        struct ath_hal_5212 *ahp = AH5212(ah);
        struct ar2413State *priv;
 
        HALASSERT(ah->ah_magic == AR5212_MAGIC);
 
        HALASSERT(ahp->ah_rfHal == AH_NULL);
        priv = ath_hal_malloc(sizeof(struct ar2413State));
        if (priv == AH_NULL) {
                HALDEBUG(ah, HAL_DEBUG_ANY,
                    "%s: cannot allocate private state\n", __func__);
                *status = HAL_ENOMEM;           /* XXX */
                return AH_FALSE;
        }
        priv->base.rfDetach             = ar2413RfDetach;
        priv->base.writeRegs            = ar2413WriteRegs;
        priv->base.getRfBank            = ar2413GetRfBank;
        priv->base.setChannel           = ar2413SetChannel;
        priv->base.setRfRegs            = ar2413SetRfRegs;
        priv->base.setPowerTable        = ar2413SetPowerTable;
        priv->base.getChannelMaxMinPower = ar2413GetChannelMaxMinPower;
        priv->base.getNfAdjust          = ar5212GetNfAdjust;
 
        ahp->ah_pcdacTable = priv->pcdacTable;
        ahp->ah_pcdacTableSize = sizeof(priv->pcdacTable);
        ahp->ah_rfHal = &priv->base;
 
        return AH_TRUE;
}
 
static HAL_BOOL
ar2413Probe(struct ath_hal *ah)
{
        return IS_2413(ah);
}
AH_RF(RF2413, ar2413Probe, ar2413RfAttach);