if_cuereg.h

Go to the documentation of this file.

/*-
 * SPDX-License-Identifier: BSD-4-Clause
 *
 * Copyright (c) 1997, 1998, 1999, 2000
 *      Bill Paul <wpaul@ee.columbia.edu>.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Bill Paul.
 * 4. Neither the name of the author nor the names of any co-contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
 * THE POSSIBILITY OF SUCH DAMAGE.
 *
 * $FreeBSD$
 */
 
/*
 * Definitions for the CATC Netmate II USB to ethernet controller.
 */
 
/* Vendor specific control commands. */
#define CUE_CMD_RESET                   0xF4
#define CUE_CMD_GET_MACADDR             0xF2
#define CUE_CMD_WRITEREG                0xFA
#define CUE_CMD_READREG                 0xFB
#define CUE_CMD_READSRAM                0xF1
#define CUE_CMD_WRITESRAM               0xFC
/* Internal registers. */
#define CUE_TX_BUFCNT                   0x20
#define CUE_RX_BUFCNT                   0x21
#define CUE_ADVANCED_OPMODES            0x22
#define CUE_TX_BUFPKTS                  0x23
#define CUE_RX_BUFPKTS                  0x24
#define CUE_RX_MAXCHAIN                 0x25
#define CUE_ETHCTL                      0x60
#define CUE_ETHSTS                      0x61
#define CUE_PAR5                        0x62
#define CUE_PAR4                        0x63
#define CUE_PAR3                        0x64
#define CUE_PAR2                        0x65
#define CUE_PAR1                        0x66
#define CUE_PAR0                        0x67
/* Error counters, all 16 bits wide. */
#define CUE_TX_SINGLECOLL               0x69
#define CUE_TX_MULTICOLL                0x6B
#define CUE_TX_EXCESSCOLL               0x6D
#define CUE_RX_FRAMEERR                 0x6F
#define CUE_LEDCTL                      0x81
/* Advenced operating mode register. */
#define CUE_AOP_SRAMWAITS               0x03
#define CUE_AOP_EMBED_RXLEN             0x08
#define CUE_AOP_RXCOMBINE               0x10
#define CUE_AOP_TXCOMBINE               0x20
#define CUE_AOP_EVEN_PKT_READS          0x40
#define CUE_AOP_LOOPBK                  0x80
/* Ethernet control register. */
#define CUE_ETHCTL_RX_ON                0x01
#define CUE_ETHCTL_LINK_POLARITY        0x02
#define CUE_ETHCTL_LINK_FORCE_OK        0x04
#define CUE_ETHCTL_MCAST_ON             0x08
#define CUE_ETHCTL_PROMISC              0x10
/* Ethernet status register. */
#define CUE_ETHSTS_NO_CARRIER           0x01
#define CUE_ETHSTS_LATECOLL             0x02
#define CUE_ETHSTS_EXCESSCOLL           0x04
#define CUE_ETHSTS_TXBUF_AVAIL          0x08
#define CUE_ETHSTS_BAD_POLARITY         0x10
#define CUE_ETHSTS_LINK_OK              0x20
/* LED control register. */
#define CUE_LEDCTL_BLINK_1X             0x00
#define CUE_LEDCTL_BLINK_2X             0x01
#define CUE_LEDCTL_BLINK_QUARTER_ON     0x02
#define CUE_LEDCTL_BLINK_QUARTER_OFF    0x03
#define CUE_LEDCTL_OFF                  0x04
#define CUE_LEDCTL_FOLLOW_LINK          0x08
 
/*
 * Address in ASIC's internal SRAM where the multicast hash table lives.
 * The table is 64 bytes long, giving us a 512-bit table.  We have to set
 * the bit that corresponds to the broadcast address in order to enable
 * reception of broadcast frames.
 */
#define CUE_MCAST_TABLE_ADDR    0xFA80
 
#define CUE_TIMEOUT             1000
#define CUE_MIN_FRAMELEN        60
#define CUE_RX_FRAMES           1
#define CUE_TX_FRAMES           1
 
#define CUE_CTL_READ            0x01
#define CUE_CTL_WRITE           0x02
 
#define CUE_CONFIG_IDX          0       /* config number 1 */
#define CUE_IFACE_IDX           0
 
/* The interrupt endpoint is currently unused by the CATC part. */
enum {
        CUE_BULK_DT_WR,
        CUE_BULK_DT_RD,
        CUE_N_TRANSFER,
};
 
struct cue_softc {
        struct usb_ether        sc_ue;
        struct mtx              sc_mtx;
        struct usb_xfer *sc_xfer[CUE_N_TRANSFER];
 
        int                     sc_flags;
#define CUE_FLAG_LINK           0x0001  /* got a link */
};
 
#define CUE_LOCK(_sc)           mtx_lock(&(_sc)->sc_mtx)
#define CUE_UNLOCK(_sc)         mtx_unlock(&(_sc)->sc_mtx)
#define CUE_LOCK_ASSERT(_sc, t) mtx_assert(&(_sc)->sc_mtx, t)