usbdi.h

Go to the documentation of this file.

/*-
 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
 *
 * Copyright (c) 2009 Andrew Thompson
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * $FreeBSD$
 */
#ifndef _USB_USBDI_H_
#define _USB_USBDI_H_
 
struct usb_fifo;
struct usb_xfer;
struct usb_device;
struct usb_attach_arg;
struct usb_interface;
struct usb_endpoint;
struct usb_page_cache;
struct usb_page_search;
struct usb_process;
struct usb_proc_msg;
struct usb_mbuf;
struct usb_fs_privdata;
struct mbuf;
 
typedef enum {  /* keep in sync with usb_errstr_table */
        USB_ERR_NORMAL_COMPLETION = 0,
        USB_ERR_PENDING_REQUESTS,       /* 1 */
        USB_ERR_NOT_STARTED,            /* 2 */
        USB_ERR_INVAL,                  /* 3 */
        USB_ERR_NOMEM,                  /* 4 */
        USB_ERR_CANCELLED,              /* 5 */
        USB_ERR_BAD_ADDRESS,            /* 6 */
        USB_ERR_BAD_BUFSIZE,            /* 7 */
        USB_ERR_BAD_FLAG,               /* 8 */
        USB_ERR_NO_CALLBACK,            /* 9 */
        USB_ERR_IN_USE,                 /* 10 */
        USB_ERR_NO_ADDR,                /* 11 */
        USB_ERR_NO_PIPE,                /* 12 */
        USB_ERR_ZERO_NFRAMES,           /* 13 */
        USB_ERR_ZERO_MAXP,              /* 14 */
        USB_ERR_SET_ADDR_FAILED,        /* 15 */
        USB_ERR_NO_POWER,               /* 16 */
        USB_ERR_TOO_DEEP,               /* 17 */
        USB_ERR_IOERROR,                /* 18 */
        USB_ERR_NOT_CONFIGURED,         /* 19 */
        USB_ERR_TIMEOUT,                /* 20 */
        USB_ERR_SHORT_XFER,             /* 21 */
        USB_ERR_STALLED,                /* 22 */
        USB_ERR_INTERRUPTED,            /* 23 */
        USB_ERR_DMA_LOAD_FAILED,        /* 24 */
        USB_ERR_BAD_CONTEXT,            /* 25 */
        USB_ERR_NO_ROOT_HUB,            /* 26 */
        USB_ERR_NO_INTR_THREAD,         /* 27 */
        USB_ERR_NOT_LOCKED,             /* 28 */
        USB_ERR_MAX
} usb_error_t;
 
/*
 * Flags for transfers
 */
#define USB_FORCE_SHORT_XFER    0x0001  /* force a short transmit last */
#define USB_SHORT_XFER_OK       0x0004  /* allow short reads */
#define USB_DELAY_STATUS_STAGE  0x0010  /* insert delay before STATUS stage */
#define USB_USER_DATA_PTR       0x0020  /* internal flag */
#define USB_MULTI_SHORT_OK      0x0040  /* allow multiple short frames */
#define USB_MANUAL_STATUS       0x0080  /* manual ctrl status */
 
#define USB_NO_TIMEOUT 0
#define USB_DEFAULT_TIMEOUT 5000        /* 5000 ms = 5 seconds */
 
#if defined(_KERNEL) || defined(_STANDALONE)
/* typedefs */
 
typedef void (usb_callback_t)(struct usb_xfer *, usb_error_t);
typedef void (usb_proc_callback_t)(struct usb_proc_msg *);
typedef usb_error_t (usb_handle_req_t)(struct usb_device *,
    struct usb_device_request *, const void **, uint16_t *);
 
typedef int (usb_fifo_open_t)(struct usb_fifo *fifo, int fflags);
typedef void (usb_fifo_close_t)(struct usb_fifo *fifo, int fflags);
typedef int (usb_fifo_ioctl_t)(struct usb_fifo *fifo, u_long cmd, void *addr, int fflags);
typedef void (usb_fifo_cmd_t)(struct usb_fifo *fifo);
typedef void (usb_fifo_filter_t)(struct usb_fifo *fifo, struct usb_mbuf *m);
 
/* USB events */
#ifndef USB_GLOBAL_INCLUDE_FILE
#include <sys/_eventhandler.h>
#endif
typedef void (*usb_dev_configured_t)(void *, struct usb_device *,
    struct usb_attach_arg *);
EVENTHANDLER_DECLARE(usb_dev_configured, usb_dev_configured_t);
 
/*
 * The following macros are used used to convert milliseconds into
 * HZ. We use 1024 instead of 1000 milliseconds per second to save a
 * full division.
 */
#define USB_MS_HZ 1024
 
#define USB_MS_TO_TICKS(ms) \
  (((uint32_t)((((uint32_t)(ms)) * ((uint32_t)(hz))) + USB_MS_HZ - 1)) / USB_MS_HZ)
 
/*
 * Common queue structure for USB transfers.
 */
struct usb_xfer_queue {
        TAILQ_HEAD(, usb_xfer) head;
        struct usb_xfer *curr;          /* current USB transfer processed */
        void    (*command) (struct usb_xfer_queue *pq);
        uint8_t recurse_1:1;
        uint8_t recurse_2:1;
        uint8_t recurse_3:1;
        uint8_t reserved:5;
};
 
/*
 * The following structure defines an USB endpoint
 * USB endpoint.
 */
struct usb_endpoint {
        /* queue of USB transfers */
        struct usb_xfer_queue endpoint_q[USB_MAX_EP_STREAMS];
 
        struct usb_endpoint_descriptor *edesc;
        struct usb_endpoint_ss_comp_descriptor *ecomp;
        const struct usb_pipe_methods *methods; /* set by HC driver */
 
        uint16_t isoc_next;
 
        uint8_t toggle_next:1;          /* next data toggle value */
        uint8_t is_stalled:1;           /* set if endpoint is stalled */
        uint8_t is_synced:1;            /* set if we a synchronised */
        uint8_t unused:5;
        uint8_t iface_index;            /* not used by "default endpoint" */
 
        uint8_t refcount_alloc;         /* allocation refcount */
        uint8_t refcount_bw;            /* bandwidth refcount */
#define USB_EP_REF_MAX 0x3f
 
        /* High-Speed resource allocation (valid if "refcount_bw" > 0) */
 
        uint8_t usb_smask;              /* USB start mask */
        uint8_t usb_cmask;              /* USB complete mask */
        uint8_t usb_uframe;             /* USB microframe */
 
        /* USB endpoint mode, see USB_EP_MODE_XXX */
 
        uint8_t ep_mode;
};
 
/*
 * The following structure defines an USB interface.
 */
struct usb_interface {
        struct usb_interface_descriptor *idesc;
        device_t subdev;
        /* Total number of alternate settings, from 1 to 256 */
        uint16_t num_altsetting;
        /* Current alternate interface index, from 0 to 255 */
        uint8_t alt_index;
        uint8_t parent_iface_index;
 
        /* Linux compat */
        struct usb_host_interface *altsetting;
        struct usb_host_interface *cur_altsetting;
        struct usb_device *linux_udev;
        void   *bsd_priv_sc;            /* device specific information */
        char   *pnpinfo;                /* additional PnP-info for this interface */
        uint8_t bsd_iface_index;
};
 
/*
 * The following structure defines a set of USB transfer flags.
 */
struct usb_xfer_flags {
        uint8_t force_short_xfer:1;     /* force a short transmit transfer
                                         * last */
        uint8_t short_xfer_ok:1;        /* allow short receive transfers */
        uint8_t short_frames_ok:1;      /* allow short frames */
        uint8_t pipe_bof:1;             /* block pipe on failure */
        uint8_t proxy_buffer:1;         /* makes buffer size a factor of
                                         * "max_frame_size" */
        uint8_t ext_buffer:1;           /* uses external DMA buffer */
        uint8_t manual_status:1;        /* non automatic status stage on
                                         * control transfers */
        uint8_t no_pipe_ok:1;           /* set if "USB_ERR_NO_PIPE" error can
                                         * be ignored */
        uint8_t stall_pipe:1;           /* set if the endpoint belonging to
                                         * this USB transfer should be stalled
                                         * before starting this transfer! */
        uint8_t pre_scale_frames:1;     /* "usb_config->frames" is
                                         * assumed to give the
                                         * buffering time in
                                         * milliseconds and is
                                         * converted into the nearest
                                         * number of frames when the
                                         * USB transfer is setup. This
                                         * option only has effect for
                                         * ISOCHRONOUS transfers.
                                         */
        uint8_t send_zlp:1;             /* send a zero length packet first */
};
 
/*
 * The following structure define an USB configuration, that basically
 * is used when setting up an USB transfer.
 */
struct usb_config {
        usb_callback_t *callback;       /* USB transfer callback */
        usb_frlength_t bufsize; /* total pipe buffer size in bytes */
        usb_frcount_t frames;           /* maximum number of USB frames */
        usb_timeout_t interval; /* interval in milliseconds */
#define USB_DEFAULT_INTERVAL    0
        usb_timeout_t timeout;          /* transfer timeout in milliseconds */
        struct usb_xfer_flags flags;    /* transfer flags */
        usb_stream_t stream_id;         /* USB3.0 specific */
        enum usb_hc_mode usb_mode;      /* host or device mode */
        uint8_t type;                   /* pipe type */
        uint8_t endpoint;               /* pipe number */
        uint8_t direction;              /* pipe direction */
        uint8_t ep_index;               /* pipe index match to use */
        uint8_t if_index;               /* "ifaces" index to use */
};
 
/*
 * Use these macro when defining USB device ID arrays if you want to
 * have your driver module automatically loaded in host, device or
 * both modes respectively:
 */
#if USB_HAVE_ID_SECTION
#define STRUCT_USB_HOST_ID \
    struct usb_device_id __section("usb_host_id")
#define STRUCT_USB_DEVICE_ID \
    struct usb_device_id __section("usb_device_id")
#define STRUCT_USB_DUAL_ID \
    struct usb_device_id __section("usb_dual_id")
#else
#define STRUCT_USB_HOST_ID \
    struct usb_device_id
#define STRUCT_USB_DEVICE_ID \
    struct usb_device_id
#define STRUCT_USB_DUAL_ID \
    struct usb_device_id
#endif                  /* USB_HAVE_ID_SECTION */
 
/*
 * The following structure is used when looking up an USB driver for
 * an USB device. It is inspired by the Linux structure called
 * "usb_device_id".
 */
struct usb_device_id {
        /* Select which fields to match against */
#if BYTE_ORDER == LITTLE_ENDIAN
        uint16_t
                match_flag_vendor:1,
                match_flag_product:1,
                match_flag_dev_lo:1,
                match_flag_dev_hi:1,
 
                match_flag_dev_class:1,
                match_flag_dev_subclass:1,
                match_flag_dev_protocol:1,
                match_flag_int_class:1,
 
                match_flag_int_subclass:1,
                match_flag_int_protocol:1,
                match_flag_unused:6;
#else
        uint16_t
                match_flag_unused:6,
                match_flag_int_protocol:1,
                match_flag_int_subclass:1,
 
                match_flag_int_class:1,
                match_flag_dev_protocol:1,
                match_flag_dev_subclass:1,
                match_flag_dev_class:1,
 
                match_flag_dev_hi:1,
                match_flag_dev_lo:1,
                match_flag_product:1,
                match_flag_vendor:1;
#endif
 
        /* Used for product specific matches; the BCD range is inclusive */
        uint16_t idVendor;
        uint16_t idProduct;
        uint16_t bcdDevice_lo;
        uint16_t bcdDevice_hi;
 
        /* Used for device class matches */
        uint8_t bDeviceClass;
        uint8_t bDeviceSubClass;
        uint8_t bDeviceProtocol;
 
        /* Used for interface class matches */
        uint8_t bInterfaceClass;
        uint8_t bInterfaceSubClass;
        uint8_t bInterfaceProtocol;
 
#if USB_HAVE_COMPAT_LINUX
        /* which fields to match against */
        uint16_t match_flags;
#define USB_DEVICE_ID_MATCH_VENDOR              0x0001
#define USB_DEVICE_ID_MATCH_PRODUCT             0x0002
#define USB_DEVICE_ID_MATCH_DEV_LO              0x0004
#define USB_DEVICE_ID_MATCH_DEV_HI              0x0008
#define USB_DEVICE_ID_MATCH_DEV_CLASS           0x0010
#define USB_DEVICE_ID_MATCH_DEV_SUBCLASS        0x0020
#define USB_DEVICE_ID_MATCH_DEV_PROTOCOL        0x0040
#define USB_DEVICE_ID_MATCH_INT_CLASS           0x0080
#define USB_DEVICE_ID_MATCH_INT_SUBCLASS        0x0100
#define USB_DEVICE_ID_MATCH_INT_PROTOCOL        0x0200
#endif
 
        /* Hook for driver specific information */
        unsigned long driver_info;
} __aligned(32);
 
#define USB_STD_PNP_INFO "M16:mask;U16:vendor;U16:product;L16:release;G16:release;" \
        "U8:devclass;U8:devsubclass;U8:devproto;" \
        "U8:intclass;U8:intsubclass;U8:intprotocol;"
#define USB_STD_PNP_HOST_INFO USB_STD_PNP_INFO "T:mode=host;"
#define USB_STD_PNP_DEVICE_INFO USB_STD_PNP_INFO "T:mode=device;"
#define USB_PNP_HOST_INFO(table)                                        \
        MODULE_PNP_INFO(USB_STD_PNP_HOST_INFO, uhub, table, table,      \
            sizeof(table) / sizeof(table[0]))
#define USB_PNP_DEVICE_INFO(table)                                      \
        MODULE_PNP_INFO(USB_STD_PNP_DEVICE_INFO, uhub, table, table,    \
            sizeof(table) / sizeof(table[0]))
#define USB_PNP_DUAL_INFO(table)                                        \
        MODULE_PNP_INFO(USB_STD_PNP_INFO, uhub, table, table,           \
            sizeof(table) / sizeof(table[0]))
 
/* check that the size of the structure above is correct */
extern char usb_device_id_assert[(sizeof(struct usb_device_id) == 32) ? 1 : -1];
 
#define USB_VENDOR(vend)                        \
  .match_flag_vendor = 1, .idVendor = (vend)
 
#define USB_PRODUCT(prod)                       \
  .match_flag_product = 1, .idProduct = (prod)
 
#define USB_VP(vend,prod)                       \
  USB_VENDOR(vend), USB_PRODUCT(prod)
 
#define USB_VPI(vend,prod,info)                 \
  USB_VENDOR(vend), USB_PRODUCT(prod), USB_DRIVER_INFO(info)
 
#define USB_DEV_BCD_GTEQ(lo)    /* greater than or equal */ \
  .match_flag_dev_lo = 1, .bcdDevice_lo = (lo)
 
#define USB_DEV_BCD_LTEQ(hi)    /* less than or equal */ \
  .match_flag_dev_hi = 1, .bcdDevice_hi = (hi)
 
#define USB_DEV_CLASS(dc)                       \
  .match_flag_dev_class = 1, .bDeviceClass = (dc)
 
#define USB_DEV_SUBCLASS(dsc)                   \
  .match_flag_dev_subclass = 1, .bDeviceSubClass = (dsc)
 
#define USB_DEV_PROTOCOL(dp)                    \
  .match_flag_dev_protocol = 1, .bDeviceProtocol = (dp)
 
#define USB_IFACE_CLASS(ic)                     \
  .match_flag_int_class = 1, .bInterfaceClass = (ic)
 
#define USB_IFACE_SUBCLASS(isc)                 \
  .match_flag_int_subclass = 1, .bInterfaceSubClass = (isc)
 
#define USB_IFACE_PROTOCOL(ip)                  \
  .match_flag_int_protocol = 1, .bInterfaceProtocol = (ip)
 
#define USB_IF_CSI(class,subclass,info)                 \
  USB_IFACE_CLASS(class), USB_IFACE_SUBCLASS(subclass), USB_DRIVER_INFO(info)
 
#define USB_DRIVER_INFO(n)                      \
  .driver_info = (n)
 
#define USB_GET_DRIVER_INFO(did)                \
  (did)->driver_info
 
/*
 * The following structure keeps information that is used to match
 * against an array of "usb_device_id" elements.
 */
struct usbd_lookup_info {
        uint16_t idVendor;
        uint16_t idProduct;
        uint16_t bcdDevice;
        uint8_t bDeviceClass;
        uint8_t bDeviceSubClass;
        uint8_t bDeviceProtocol;
        uint8_t bInterfaceClass;
        uint8_t bInterfaceSubClass;
        uint8_t bInterfaceProtocol;
        uint8_t bIfaceIndex;
        uint8_t bIfaceNum;
        uint8_t bConfigIndex;
        uint8_t bConfigNum;
};
 
/* Structure used by probe and attach */
 
struct usb_attach_arg {
        struct usbd_lookup_info info;
        device_t temp_dev;              /* for internal use */
        unsigned long driver_info;      /* for internal use */
        void *driver_ivar;
        struct usb_device *device;      /* current device */
        struct usb_interface *iface;    /* current interface */
        enum usb_hc_mode usb_mode;      /* host or device mode */
        uint8_t port;
        uint8_t dev_state;
#define UAA_DEV_READY           0
#define UAA_DEV_DISABLED        1
#define UAA_DEV_EJECTING        2
};
 
/*
 * General purpose locking wrappers to ease supporting
 * USB polled mode:
 */
#ifdef INVARIANTS
#define USB_MTX_ASSERT(_m, _t) do {             \
        if (!USB_IN_POLLING_MODE_FUNC())        \
                mtx_assert(_m, _t);             \
} while (0)
#else
#define USB_MTX_ASSERT(_m, _t) do { } while (0)
#endif
 
#define USB_MTX_LOCK(_m) do {                   \
        if (!USB_IN_POLLING_MODE_FUNC())        \
                mtx_lock(_m);                   \
} while (0)
 
#define USB_MTX_UNLOCK(_m) do {                 \
        if (!USB_IN_POLLING_MODE_FUNC())        \
                mtx_unlock(_m);                 \
} while (0)
 
#define USB_MTX_LOCK_SPIN(_m) do {              \
        if (!USB_IN_POLLING_MODE_FUNC())        \
                mtx_lock_spin(_m);              \
} while (0)
 
#define USB_MTX_UNLOCK_SPIN(_m) do {            \
        if (!USB_IN_POLLING_MODE_FUNC())        \
                mtx_unlock_spin(_m);            \
} while (0)
 
/*
 * The following is a wrapper for the callout structure to ease
 * porting the code to other platforms.
 */
struct usb_callout {
        struct callout co;
};
#define usb_callout_init_mtx(c,m,f) callout_init_mtx(&(c)->co,m,f)
#define usb_callout_reset(c,...) do {                   \
        if (!USB_IN_POLLING_MODE_FUNC())                \
                callout_reset(&(c)->co, __VA_ARGS__);   \
} while (0)
#define usb_callout_reset_sbt(c,...) do {                       \
        if (!USB_IN_POLLING_MODE_FUNC())                        \
                callout_reset_sbt(&(c)->co, __VA_ARGS__);       \
} while (0)
#define usb_callout_stop(c) do {                        \
        if (!USB_IN_POLLING_MODE_FUNC()) {              \
                callout_stop(&(c)->co);                 \
        } else {                                        \
                /*                                      \
                 * Cannot stop callout when             \
                 * polling. Set dummy callback          \
                 * function instead:                    \
                 */                                     \
                (c)->co.c_func = &usbd_dummy_timeout;   \
        }                                               \
} while (0)
#define usb_callout_drain(c) callout_drain(&(c)->co)
#define usb_callout_pending(c) callout_pending(&(c)->co)
 
/* USB transfer states */
 
#define USB_ST_SETUP       0
#define USB_ST_TRANSFERRED 1
#define USB_ST_ERROR       2
 
/* USB handle request states */
#define USB_HR_NOT_COMPLETE     0
#define USB_HR_COMPLETE_OK      1
#define USB_HR_COMPLETE_ERR     2
 
/*
 * The following macro will return the current state of an USB
 * transfer like defined by the "USB_ST_XXX" enums.
 */
#define USB_GET_STATE(xfer) (usbd_xfer_state(xfer))
 
/*
 * The following structure defines the USB process message header.
 */
struct usb_proc_msg {
        TAILQ_ENTRY(usb_proc_msg) pm_qentry;
        usb_proc_callback_t *pm_callback;
        usb_size_t pm_num;
};
 
#define USB_FIFO_TX 0
#define USB_FIFO_RX 1
 
/*
 * Locking note for the following functions.  All the
 * "usb_fifo_cmd_t" and "usb_fifo_filter_t" functions are called
 * locked. The others are called unlocked.
 */
struct usb_fifo_methods {
        usb_fifo_open_t *f_open;
        usb_fifo_close_t *f_close;
        usb_fifo_ioctl_t *f_ioctl;
        /*
         * NOTE: The post-ioctl callback is called after the USB reference
         * gets locked in the IOCTL handler:
         */
        usb_fifo_ioctl_t *f_ioctl_post;
        usb_fifo_cmd_t *f_start_read;
        usb_fifo_cmd_t *f_stop_read;
        usb_fifo_cmd_t *f_start_write;
        usb_fifo_cmd_t *f_stop_write;
        usb_fifo_filter_t *f_filter_read;
        usb_fifo_filter_t *f_filter_write;
        const char *basename[4];
        const char *postfix[4];
};
 
struct usb_fifo_sc {
        struct usb_fifo *fp[2];
        struct usb_fs_privdata *dev;
};
 
const char *usbd_errstr(usb_error_t error);
void    *usbd_find_descriptor(struct usb_device *udev, void *id,
            uint8_t iface_index, uint8_t type, uint8_t type_mask,
            uint8_t subtype, uint8_t subtype_mask);
struct usb_config_descriptor *usbd_get_config_descriptor(
            struct usb_device *udev);
struct usb_device_descriptor *usbd_get_device_descriptor(
            struct usb_device *udev);
struct usb_interface *usbd_get_iface(struct usb_device *udev,
            uint8_t iface_index);
struct usb_interface_descriptor *usbd_get_interface_descriptor(
            struct usb_interface *iface);
struct usb_endpoint *usbd_get_endpoint(struct usb_device *udev, uint8_t iface_index,
                    const struct usb_config *setup);
struct usb_endpoint *usbd_get_ep_by_addr(struct usb_device *udev, uint8_t ea_val);
usb_error_t     usbd_interface_count(struct usb_device *udev, uint8_t *count);
enum usb_hc_mode usbd_get_mode(struct usb_device *udev);
enum usb_dev_speed usbd_get_speed(struct usb_device *udev);
void    device_set_usb_desc(device_t dev);
void    usb_pause_mtx(struct mtx *mtx, int _ticks);
usb_error_t     usbd_set_pnpinfo(struct usb_device *udev,
                        uint8_t iface_index, const char *pnpinfo);
usb_error_t     usbd_add_dynamic_quirk(struct usb_device *udev,
                        uint16_t quirk);
usb_error_t     usbd_set_endpoint_mode(struct usb_device *udev,
                        struct usb_endpoint *ep, uint8_t ep_mode);
uint8_t         usbd_get_endpoint_mode(struct usb_device *udev,
                        struct usb_endpoint *ep);
 
const struct usb_device_id *usbd_lookup_id_by_info(
            const struct usb_device_id *id, usb_size_t sizeof_id,
            const struct usbd_lookup_info *info);
int     usbd_lookup_id_by_uaa(const struct usb_device_id *id,
            usb_size_t sizeof_id, struct usb_attach_arg *uaa);
 
usb_error_t usbd_do_request_flags(struct usb_device *udev, struct mtx *mtx,
                    struct usb_device_request *req, void *data, uint16_t flags,
                    uint16_t *actlen, usb_timeout_t timeout);
#define usbd_do_request(u,m,r,d) \
  usbd_do_request_flags(u,m,r,d,0,NULL,USB_DEFAULT_TIMEOUT)
 
uint8_t usbd_clear_stall_callback(struct usb_xfer *xfer1,
            struct usb_xfer *xfer2);
uint8_t usbd_get_interface_altindex(struct usb_interface *iface);
usb_error_t usbd_set_alt_interface_index(struct usb_device *udev,
            uint8_t iface_index, uint8_t alt_index);
uint32_t usbd_get_isoc_fps(struct usb_device *udev);
uint32_t usbd_get_max_frame_length(const struct usb_endpoint_descriptor *,
    const struct usb_endpoint_ss_comp_descriptor *,
    enum usb_dev_speed);
usb_error_t usbd_transfer_setup(struct usb_device *udev,
            const uint8_t *ifaces, struct usb_xfer **pxfer,
            const struct usb_config *setup_start, uint16_t n_setup,
            void *priv_sc, struct mtx *priv_mtx);
void    usbd_transfer_submit(struct usb_xfer *xfer);
void    usbd_transfer_clear_stall(struct usb_xfer *xfer);
void    usbd_transfer_drain(struct usb_xfer *xfer);
uint8_t usbd_transfer_pending(struct usb_xfer *xfer);
void    usbd_transfer_start(struct usb_xfer *xfer);
void    usbd_transfer_stop(struct usb_xfer *xfer);
void    usbd_transfer_unsetup(struct usb_xfer **pxfer, uint16_t n_setup);
void    usbd_transfer_poll(struct usb_xfer **ppxfer, uint16_t max);
void    usbd_set_parent_iface(struct usb_device *udev, uint8_t iface_index,
            uint8_t parent_index);
uint8_t usbd_get_bus_index(struct usb_device *udev);
uint8_t usbd_get_device_index(struct usb_device *udev);
void    usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode);
uint8_t usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode);
uint8_t usbd_device_attached(struct usb_device *udev);
 
usb_frlength_t
        usbd_xfer_old_frame_length(struct usb_xfer *xfer, usb_frcount_t frindex);
void    usbd_xfer_status(struct usb_xfer *xfer, int *actlen, int *sumlen,
            int *aframes, int *nframes);
struct usb_page_cache *usbd_xfer_get_frame(struct usb_xfer *, usb_frcount_t);
void    *usbd_xfer_get_frame_buffer(struct usb_xfer *, usb_frcount_t);
void    *usbd_xfer_softc(struct usb_xfer *xfer);
void    *usbd_xfer_get_priv(struct usb_xfer *xfer);
void    usbd_xfer_set_priv(struct usb_xfer *xfer, void *);
void    usbd_xfer_set_interval(struct usb_xfer *xfer, int);
uint8_t usbd_xfer_state(struct usb_xfer *xfer);
void    usbd_xfer_set_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex,
            void *ptr, usb_frlength_t len);
void    usbd_xfer_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex,
            void **ptr, int *len);
void    usbd_xfer_set_frame_offset(struct usb_xfer *xfer, usb_frlength_t offset,
            usb_frcount_t frindex);
usb_frlength_t usbd_xfer_max_len(struct usb_xfer *xfer);
usb_frlength_t usbd_xfer_max_framelen(struct usb_xfer *xfer);
usb_frcount_t usbd_xfer_max_frames(struct usb_xfer *xfer);
uint8_t usbd_xfer_get_fps_shift(struct usb_xfer *xfer);
usb_frlength_t usbd_xfer_frame_len(struct usb_xfer *xfer,
            usb_frcount_t frindex);
void    usbd_xfer_set_frame_len(struct usb_xfer *xfer, usb_frcount_t frindex,
            usb_frlength_t len);
void    usbd_xfer_set_timeout(struct usb_xfer *xfer, int timeout);
void    usbd_xfer_set_frames(struct usb_xfer *xfer, usb_frcount_t n);
void    usbd_xfer_set_zlp(struct usb_xfer *xfer);
uint8_t usbd_xfer_get_and_clr_zlp(struct usb_xfer *xfer);
void    usbd_xfer_set_stall(struct usb_xfer *xfer);
int     usbd_xfer_is_stalled(struct usb_xfer *xfer);
void    usbd_xfer_set_flag(struct usb_xfer *xfer, int flag);
void    usbd_xfer_clr_flag(struct usb_xfer *xfer, int flag);
uint16_t usbd_xfer_get_timestamp(struct usb_xfer *xfer);
uint8_t usbd_xfer_maxp_was_clamped(struct usb_xfer *xfer);
 
void    usbd_copy_in(struct usb_page_cache *cache, usb_frlength_t offset,
            const void *ptr, usb_frlength_t len);
int     usbd_copy_in_user(struct usb_page_cache *cache, usb_frlength_t offset,
            const void *ptr, usb_frlength_t len);
void    usbd_copy_out(struct usb_page_cache *cache, usb_frlength_t offset,
            void *ptr, usb_frlength_t len);
int     usbd_copy_out_user(struct usb_page_cache *cache, usb_frlength_t offset,
            void *ptr, usb_frlength_t len);
void    usbd_get_page(struct usb_page_cache *pc, usb_frlength_t offset,
            struct usb_page_search *res);
void    usbd_m_copy_in(struct usb_page_cache *cache, usb_frlength_t dst_offset,
            struct mbuf *m, usb_size_t src_offset, usb_frlength_t src_len);
void    usbd_frame_zero(struct usb_page_cache *cache, usb_frlength_t offset,
            usb_frlength_t len);
void    usbd_start_re_enumerate(struct usb_device *udev);
usb_error_t
        usbd_start_set_config(struct usb_device *, uint8_t);
int     usbd_in_polling_mode(void);
void    usbd_dummy_timeout(void *);
 
int     usb_fifo_attach(struct usb_device *udev, void *priv_sc,
            struct mtx *priv_mtx, struct usb_fifo_methods *pm,
            struct usb_fifo_sc *f_sc, uint16_t unit, int16_t subunit,
            uint8_t iface_index, uid_t uid, gid_t gid, int mode);
void    usb_fifo_detach(struct usb_fifo_sc *f_sc);
int     usb_fifo_alloc_buffer(struct usb_fifo *f, uint32_t bufsize,
            uint16_t nbuf);
void    usb_fifo_free_buffer(struct usb_fifo *f);
uint32_t usb_fifo_put_bytes_max(struct usb_fifo *fifo);
void    usb_fifo_put_data(struct usb_fifo *fifo, struct usb_page_cache *pc,
            usb_frlength_t offset, usb_frlength_t len, uint8_t what);
void    usb_fifo_put_data_linear(struct usb_fifo *fifo, void *ptr,
            usb_size_t len, uint8_t what);
uint8_t usb_fifo_put_data_buffer(struct usb_fifo *f, void *ptr, usb_size_t len);
void    usb_fifo_put_data_error(struct usb_fifo *fifo);
uint8_t usb_fifo_get_data(struct usb_fifo *fifo, struct usb_page_cache *pc,
            usb_frlength_t offset, usb_frlength_t len, usb_frlength_t *actlen,
            uint8_t what);
uint8_t usb_fifo_get_data_linear(struct usb_fifo *fifo, void *ptr,
            usb_size_t len, usb_size_t *actlen, uint8_t what);
uint8_t usb_fifo_get_data_buffer(struct usb_fifo *f, void **pptr,
            usb_size_t *plen);
void    usb_fifo_reset(struct usb_fifo *f);
void    usb_fifo_wakeup(struct usb_fifo *f);
void    usb_fifo_get_data_error(struct usb_fifo *fifo);
void    *usb_fifo_softc(struct usb_fifo *fifo);
void    usb_fifo_set_close_zlp(struct usb_fifo *, uint8_t);
void    usb_fifo_set_write_defrag(struct usb_fifo *, uint8_t);
void    usb_fifo_free(struct usb_fifo *f);
#endif  /* _KERNEL || _STANDALONE */
#endif  /* _USB_USBDI_H_ */